Moral Hazard!!

ドラマーが音楽やホームページやガラクタを作るよ。

QTS 4.3.3.0404 build 20171213が出てたので雑翻訳

No Comment 駄日記,

[Important Notes]
- For the status of QTS updates and maintenance for your NAS model,ana visit https://www.qnap.com/en/product/eol.php
- When QTS 4.3.x is installed on NAS models running on 64-bit Intel and AMD processors, some applications may not be supported. To check if installed apps on your NAS are compatible with QTS 4.3.x, download the QTS 64-bit compatibility tool and install it on your current QTS build. (https://download.qnap.com/QPKG/CF64_0.1-1114.qpkg.zip)
- QTS 4.3.3 is the final available firmware update for the following models:
TS-112P, TS-212P, TS-212-E, HS-210, TS-112, TS-212, TS-121, TS-221, TS-421 TS-120, TS-220, TS-420, TS-420U, TS-421U TS-412, TS-412U, TS-419U, TS-419U+, TS-419U II, TS-119P II, TS-219P II, TS-419P II, TS-119P+, TS-219P+, TS-419P+, TS-119P, TS-219P, TS-419P, TS-119, TS-219, TS-419

[Fixed Issues]
- The transcoding wizard in File Station would indicate an incorrect path for managing transcoding tasks.
- Disconnecting an external storage device from the NAS might occasionally cause videos to stop playing when users accessed a shared folder via Samba.
- Media Library could not generate correct thumbnails for certain CR2 files.
- QTS would display messages about the exFAT license on the TAS-x68 and TS-x28, which do not support the exFAT format.
- Users that were created when Android Station was enabled could not access the "Android" shared folder.
- Users could not successfully download files with certain Chinese filenames via share links when accessing the myQNAPcloud website via Internet Explorer.
- Users could not restart certain NAS models after connecting to the NAS from Windows using iSCSI Initiator and then updating QTS to 4.3.3.0396 Build 20171205.

[重要注意事項]

ご利用のNASモデルのメンテナンス、アップデート対応状況はこちらでご確認ください。

64bit IntelとAMDプロセッサが搭載されているモデルのNASで QTS 4.3.x がインストールされている場合、いくつかのアプリケーションがサポートされていない可能性があります。
ご利用のNASにインストールされているアプリケーションが QTS 4.3.x と互換性 があるか確認し、 QTS 64-bit と互換性のあるアプリケーションをダウンロードし、現在のバージョンのQTSにインストールしてください。
(リンク先)

QTS 4.3.3 :は以下のモデルで最終更新版のファームウェアとなります。
TS-112P, TS-212P, TS-212-E, HS-210, TS-112, TS-212, TS-121, TS-221, TS-421 TS-120, TS-220, TS-420, TS-420U, TS-421U TS-412, TS-412U, TS-419U, TS-419U+, TS-419U II, TS-119P II, TS-219P II, TS-419P II, TS-119P+, TS-219P+, TS-419P+, TS-119P, TS-219P, TS-419P, TS-119, TS-219, TS-419

[修正された問題]

・ファイルステーション上の変換ウィザードが変換タスクを管理する際、間違ったパスを表示する問題を修正。
・Samba(ファイルサーバ共有アプリ)を使用して共有フォルダからビデオを再生している際、時々外部ストレージデバイスの接続が切れる問題を修正。
・メディアライブラリがCR2(CANONのRawファイル)から正確なサムネイルを作成出来なかった問題を修正。
・TAS-x68 and TS-x28モデルではexFATをサポートしていないにもかかわらず、QTSでexFATライセンスを表示していた問題を修整。
(※筆者注釈 : 特定モデル以外のNASではexFATドライバをライセンス購入することで使用可能になるらしい。参照)
・ユーザーがAndroid Stationで利用できない"Android"共有フォルダを作成できていた問題を修正。
・Internet Explorerを利用してmyQNAPCloudにアクセスした際、漢字ファイル名の共有リンクからファイルがダウンロードできない問題を修正。
・WindowsのiSCSIイニシエーター からNASに接続した後 QTS を 4.3.3.0396 Build 20171205にアップデートした際、ユーザーがNASを再起動できなくなる問題を修正。